Hey guys!
Good news, we got the final carbon pieces installed on the Lambo Panigale! Bad news, it took forever to get these damn pieces installed...no joke it was like 3 hours of trying to get holes to line up, trimming carbon and just in general being a pain in our asses.
So we didn't get nearly as much done as I was hoping but we really don't have much left.
We've got the blacked out triple tree and all the control mods and we are literally done!
We'll still have to take it for a test ride, put it on the dyno ...
2023-09-20 03:40:04 +0000 UTC
View Post
Hey guys!
This is a patreon only video just for you! We got the rear caliper prepped, installed and bled and it looks so good!
I also shared a sneak peak of the custom garage floor and I couldn't be more stoked with how that turned out as well!
Enjoy the video and next week we will be getting to work on the control set up which I believe will be some of the final mods for the bike!
2023-09-16 15:58:48 +0000 UTC
View Post
Hey guys!
We got the custom painted front brake calipers installed and they look absolutely incredible! We also added the titanium bolts, carbon front fender, carbon brake cooling ducts and the front axle sliders to finish off the front end.
Next we'll be doing the rear calipers along with bleeding the rear system and replacing those red pieces on the rear sets finally.
Enjoy the episode and stay tuned for more!
2023-09-14 01:42:28 +0000 UTC
View Post
Happy Sunday fam!
In this episode we finished up our $6k carbon wheel and brake set up! These carbon wheels with the t-drive rotors and titanium bolts look so freaking good together and overall we shaved just under 6 lbs of rotational mass!
Next we will be installing our custom painted brake calipers and I can't wait to see how they look on this beauty!
Enjoy the episode and we will be filming some vlogs this week working on my dream garage build finally!
2023-09-10 15:18:01 +0000 UTC
View Post
Hey guys!
We are back! Dado was on vacation so we took a little break as well until he returns but now we are back to work!
We got the new rear carbon wheel installed along with the lightweight rotor, titanium bolts and new blacked out rear axle nut and it looks INCREDIBLE! It also saved 3 lbs over the stock wheels which brings our rear wheel savings with the chain and sprocket to close to 7 lbs!
That's some serious savings on rotational mass. As I mentioned in the video we decided not to use the lam...
2023-09-06 15:30:14 +0000 UTC
View Post
In love with this custom seat cover! It brings the entire design together and adds some much needed blue and orange in the seat area...it honestly might be my fav part of the entire bike.
I talked to the painter and he said the orange calipers should be ready early next week so we'll be able to do the carbon wheels and then calipers next!
Enjoy the episode and let me know what you think of the custom seat cover!
2023-08-27 14:23:57 +0000 UTC
View Post
Hey guys!
In this video we finished the rearsets and installed the custom painted carbon belly panel and it looks absolutely incredible!!
We now have all of the custom painted parts on the bike and we can finally get a good idea of how its going to look when its done and I gotta say it looks even better than I imagined!
I'm also going to chat with some peeps to see what we can do with those red pieces from the rearset...I'd prefer to just make them black over trying to match the blue or orange so I'll keep ya posted on that...
2023-08-24 15:07:28 +0000 UTC
View Post
Hey guys!
This is a patreon only video just for you to show our thanks for your continued support! We installed a gorgeous set of lightech rearsets on this beauty along with a new rear brake reservoir from motorcorse that looks incredible.
We had to do these first before the carbon belly panel but now we can get that installed next and finally see all the custom painted carbon parts on the bike!
I hope you guys are as excited as we are and that video will be coming tomorrow so stay tuned!
2023-08-23 16:43:53 +0000 UTC
View Post
Hey guys!
We got the custom painted carbon fairings installed and they look absolutely INCREDIBLE!!! I honestly think this will be one of the coolest bikes of all time when its done.
You can finally start to get an idea of how amazing this bike is going to look with these on and it just makes me even more excited to get the belly pan and custom seat cover installed!
We have to knock out the rear sets next since the belly panel will be in the way then we can continue with the final custom painted carbon piece!
En...
2023-08-16 16:45:42 +0000 UTC
View Post
Hey guys!
Good news...we got the gas tank installed with the new fuel line hose and IT WORKS!!! So now that the gas tank is finally installed we are able to move forward with all of our other parts!
Also, Mani got in contact with motocorse and they are sending out a new rear set bracket for us next week! You guys have no idea how happy this makes me that we can continue on with our build in a timely fashion...I feel like I've been waiting for years to see this bike together with all the custom painted parts.
It ...
2023-08-12 17:57:39 +0000 UTC
View Post
Hey guys,
This is two videos in a row we weren't able to complete the install and I'm really starting to get frustrated now...unfortunately both of these are out of my control so we are now in a waiting period for the fuel line and a rear set mount that is the proper length.
Not sure when I'll be able to film next but hopefully I get one of the parts later this week. I really think the next build will be something less custom and a bit more simple to give me a break from relying on others because its really starting to stre...
2023-08-09 18:33:44 +0000 UTC
View Post
Hey guys,
This is a patreon only video just for you! Unfortunately we ran into an issue with the damn fuel line...Ducati actually had to do a recall on these back in 2018 when they first released the new Panigale.
After we got the tank all set up it was leaking gas from both of the fittings that attach from the main fuel line so I went ahead and ordered two new ones along with new factory clamps just to be safe.
It blows my mind they couldn't come up with a better design for such an important component BUT hey it is D...
2023-08-05 16:35:41 +0000 UTC
View Post
Hey guys!
We finally got all of the carbon pieces back from the painter done in a glossy finish and man do they look amazing! We also decided to installed the carbon engine covers as they will help with heat on the riders legs and I think they look better than having the engine exposed as well.
Next video we will be finally installing the tank and then doing the carbon frame covers in preparation of the custom painted carbon side fairings!!!
Enjoy the video and stay tuned for more!
2023-08-02 17:55:42 +0000 UTC
View Post
Hey guys!
I can't even begin to explain how freaking stoked I am for this piece. It looks absolutely incredible!!! I honestly think this will be one of the coolest bikes ever built when we are done.
I will let the video speak for itself here. Enjoy :)
2023-07-28 17:52:00 +0000 UTC
View Post
Hey guys!
I gotta say these things are quite a lot of work to install but man do they make the bike look incredible! We will be doing the custom painted from fairing next and I can't wait to see how it all looks together!!!
Thank you all for your continued support and stay tuned for more vids coming on this and my new Lambo SF!
2023-07-26 15:37:01 +0000 UTC
View Post
Hey guys!
In this episode we got to work on finishing up the rear subframe and prepping the carbon tank for installation.
Surprisingly everything went super smooth and the the tank fits and is ready to be plugged in once we get the carbon pieces back that go under neath the tank and subframe.
Next we will move up to the front of the bike to install the carbon front fairing stay, carbon dash surround and then the carbon front fairing!
It's going to really pick up speed now so enjoy these videos and stay tuned fo...
2023-07-19 15:43:00 +0000 UTC
View Post
Hey guys!
We decided to do a patreon only video just for you! In this episode we continued the installation of the carbon rear subframe.
The most important part and the the thing I was most nervous about, was drilling the subframe to hang the akra exhaust.
I'm happy to report Dado hand bent the brackets in about 15 minutes and it was all pretty smooth from there!
I'm really happy with how this turned out and I'm super excited to get the carbon tank installed in the next episode!
2023-07-17 23:54:49 +0000 UTC
View Post
Hey guys!
First off, just a reminder we will be at Ducati New York City this Saturday, July 15th from 2-4pm taking delivery of my new Lambo Streetfighter! Would love to meet some of you in person and have you check out the bike!
And finally we are onto installing the first piece of our custom painted carbon parts! We are starting with the subframe as everything else kinda gets built around this piece.
The subframe is a lot of work as you have to transfer over a lot of the parts from the stock su...
2023-07-13 16:52:34 +0000 UTC
View Post
Hey guys!
This is a patreon only video to show our thanks for your continued support! This is something we've never actually done before and it was A LOT of work to do with this exhaust installed.
Dado in his typical wizardry figured out a way to make it happen but it was not easy. It does look super cool though and I've never even seen one of these on any bike so it fits with the theme of being one of a kind :)
Also I am picking up my Lamborghini Streetfigther this Saturday July 15th from 1-4pm at Ducat...
2023-07-12 01:21:06 +0000 UTC
View Post
Hey guys!
So we found more carbon on the bike that wasn't glossy and we decided to remove it and get it finished in gloss so it matches the rest of the carbon on the bike.
We also pulled off all the brake calipers and are going to have them painted in the Arancio Borealis (Orange) with the brembo letters in black to match the rest of the bike and finish off that custom touch!
And then we just decided to strip the rest of the bike so we will be ready to install the rest of the upgrades that go under the fairings in pr...
2023-07-07 17:00:23 +0000 UTC
View Post
Hey guys!
Disassembly of our Panigale in preparation for our custom lambo painted carbon pieces has officially begun!!! I can't even explain how excited I am to get these parts installed so I'm trying my best to be patient. haha
The tank and subframe came off easier than I had remembered in the past but I know its going to be a lot of work getting all the stock parts transferred over.
The sneak peek of the new subframe on the bike looked absolutely incredible. The light blue next to the titanium exhaust looks so...
2023-07-05 22:47:35 +0000 UTC
View Post
Hey guys!
The custom painted parts are done and I couldn't be more stoked with how they turned out!!! The blue and the orange with the carbon accents look absolutely incredible!
And the amount of time Dave spent to get rid of the edges of the decals and paint is honestly insane. I've never seen a paint scheme of this caliber aside from very high end exotic cars.
I can't wait to start installing these pieces and so how it looks on the bike! Next video we will be removing the stock subframe in preparation fo...
2023-06-30 17:43:27 +0000 UTC
View Post
Hey guys!
I randomly got a text from the painter yesterday sending me some photos of a couple of the parts about half done and I was like I need to come over there right now and see this...
When I say the camera doesn't do this justice I really hope you understand because it looks absolutely INCREDIBLE. He has already done 3 stages of sanding and clear which makes the finish look so deep and 3D I've never seen anything like it.
You guys have seen how the carbon looks from fullsix when it comes in a glossy finish and t...
2023-06-23 16:23:03 +0000 UTC
View Post
Hey guys!
We decided to keep the wet clutch and do a clear clutch cover install instead of replacing it with the dry clutch. We go into all of the reasons why in the video BUT all three of us personally prefer the wet clutch so hopefully you guys are ok with that :)
I think the black on black set up is gonna look amazing with the light blue and orange from the lambo paint scheme as well.
I'm really hoping we have all the painted parts back next week and then we will be digging into this thing to replace A LOT of parts...
2023-06-21 21:27:29 +0000 UTC
View Post
Hey guys!
So I actually realized we had purchased stealth mirrors for Christina's Panigale V2 and turns out they are the same part number as the ones for the V4! So I figured lets finish cleaning up the front end with what I believe to be the best mods to do so.
We got the rizoma stealth mirros installed along with the tiny turn signals and the wrs smoked wind screen which looks absolutely perfect. I think if you actually put mirrors on the bike this is the best way to do it.
We also go paint colors mixed for th...
2023-06-17 17:48:08 +0000 UTC
View Post
Hey guys!
Everyone mentioned that they preferred the rizoma stealth mirror and turn signal set up over the nrc and bar end mirrors so we went ahead and swapped those out today.
Unfortunately we received stealth mirrors that fit on the 959/1299 so we have to wait till we receive the correct ones before we can put them on the bike.
Luckily they are super easy to install and we were able to get the "hardest" part done with the rizoma signals in the meantime.
Also the painter is spraying out samples of colors for me this ...
2023-06-13 23:43:02 +0000 UTC
View Post
Hey guys!
Wanted to get the bike out to test out the new chain and sprocket set up and it feels AMAZING! Bike feels smoother to pull out from a stop and even the quick shifter feels a little crisper which is always nice.
Also got to ride with Teens on her new V2 for the first time on my channel and we had a great time! She loves the bike and her new riding gear so I'm very happy for her.
I've been delaying the build a little waiting and hoping to get the painted parts back soon so that's why things have been a l...
2023-06-07 22:04:31 +0000 UTC
View Post
Hey guys!
We got our new blacked out, superlight 520 chain and sprocket conversion installed and it looks incredible!
This set up also shaved 1.5lbs of rotational mass with is great as once we get the light weight wheels it will add to that total!
They painter should be painting all the carbon parts this week as well AND we have a ton of parts coming from motomillion this week too!
The build is really going to ramp up in the next week or two and I can't freaking wait to see how it all comes together. Enjoy the v...
2023-06-03 20:03:14 +0000 UTC
View Post
Hey guys!
This is something I've been getting asked to do for a long time so I figured I'd give it a shot. I used my Gopro Hero10 and my wired purple panda mic to try and capture the sound of the bike the best I could.
I shot in 4k and I'm actually pretty happy with how it turned out. Let me know what you guys think. If you enjoy these vids I'd be happy to do more with other bikes/cars.
I also wanted to test out and make sure the engine light did not come back on and I'm happy to report the bike is working...
2023-05-29 16:59:12 +0000 UTC
View Post
Hey guys!
We finally got the bike sorted and the flash working properly and I gotta say the bike feels absolutely incredible! This is the best feeling panigale I've ridden period.
Also, the gopro mic for whatever reason did an awesome job of picking up the sound in the opening clips and man does it sound incredible.
I'm going to be filming a raw exhaust sound video next trying to capture the on bike sound better because the intercom mic set up doesn't even come close to doing this sound justice while riding.
Hop...
2023-05-24 04:20:43 +0000 UTC
View Post
